SC_DOT.TXT
gINT v. 5 Agency Reports:
South Carolina Department of Transportation
REVISION HISTORY
================
28 December 2003:
1. Converted to version 5/6 format.
2. Made cosmetic changes in Input to make data entry easier.
None of the modifications affected the underlying database or report structures. Files are compatible with previous versions.
----------------------------------
28 May 1998:
Corrected metric units in blow count values
----------------------------------
09 January 1998:
Initial Upload
*************************************************
INCLUDED FILES:
SC_DOT.GLB
gINT library file containing:
Logs : SC_DOT
Discrete Graphics: SCDOT (logo)
Material Symbols : SCAT SC DOT: Asphalt
SCBR SC DOT: Bedrock
SCCLAY SC DOT: clay
SCCLSAND SC DOT: clayey sand
SCCT SC DOT: concrete
SCLS SC DOT: limestone
SCMARL SC DOT: marl
SCSAND SC DOT: sand
SCSAP SC DOT: Saprolite
SCSILT SC DOT: Silt
SCSTCLAY SC DOT: Silty Clay/Clayey Silt
SCSTSAND SC DOT: Silty Sand/Sandy Silt
SCTS SC DOT: Topsoil
Lookup Lists : HAMMER_TYPE
UNITS
Drawing Library : SC_DOT_LEGEND
(see Special Notes below)
SC_DOT.GDT
gINT project data template. You will clone this file to create new project files.
SC_DOT.GPJ
gINT project file containing one borehole of example data. You can use this file to clarify any input procedure questions by looking at the way the data was entered in the Input application. You can also output this data using the two report templates to see what the final output looks like.
*************************************************
INSTALLATION PROCEDURE:
Copy SC_DOT.GDT to your gINT data template directory (usually C:\Program Files\GINT\DATATMPL or C:\Program Files\GINTW\DATATMPL).
Copy SC_DOT.GPJ to your gINT projects directory (usually C:\Program Files\GINT\PROJECTS or C:\Program Files\GINTW\PROJECTS).
Merge SC_DOT.GLB:
Bring up gINT.
Move to the Utilities application group and then to the Lib Merge/Copy application.
Mark "Merge From".
Specify the source library file as SC_DOT.GLB. Remember to specify the path or use the browse button (...) to select the file with a file dialog.
Check the selection and query options to best meet your needs. If you wish to merge all of the above, mark Select All and Never Query.
Move all of the tables from the Available Source Table column to the Tables to Merge/Copy column by clicking the >> button.
Click the Execute button.
*************************************************
SPECIAL NOTES:
1. To print the SC DOT soil/rock symbol legend, move to Drawings:Drawing Library. Make SC_DOT_LEGEND the current page and then print.
2. The log form accepts data entry in either English or Metric and allows output in either set of units.
3. In the PROJECT table you will find a field that controls DXF output. This is for the use of SC DOT. It has no effect on the log form.
*************************************************