BC_MOT.TXT

gINT v. 5 Agency Report:
  British Columbia Ministry of Transportation
  Rock Core, Test Hole, and Test Pit logs

  Metric Metric Input and Output
*****************************************************************

!!!!!!!!!!!!!! VERY IMPORTANT !!!!!!!!!!!!!!!!!!!!!!
DO NOT MERGE THE BC_MOT.GLB INTO YOUR CURRENT LIBRARY.  USE AS-IS.  See "SPECIAL NOTES" below for details.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

REVISION HISTORY
================
15 May 2004:
1.  Initial Upload
*****************************************************************

INCLUDED FILES:
BC_MOT.GLB
  gINT library file containing the following log forms:
    ROCK CORE LOG
    SUMMARY LOG
    TEST PIT LOG
    TH STICK_LOG_ATT  (Test Hole with Atterberg Limits)
    TH STICK_LOG_FSG  (Test Hole with grain size data)
    TP STICK_LOG_ATT  (Test Pit with Atterberg Limits)
    TP STICK_LOG_FSG  (Test Pit with grain size data)

BC_MOT.GDT
  gINT project data template.  You will clone this file to create new project files.

BC_MOT.GPJ
  gINT project file containing one test hole and one test pit of example data.  You can use this file to clarify any input procedure questions by looking at the way the data was entered in the Input application.  You can also output this data using the two report templates to see what the final output looks like.
*************************************************

INSTALLATION PROCEDURE:
1. Copy BC_MOT.GLB to the same folder as your usual library (usually C:\Program Files\GINT or C:\Program Files\GINTW).
2. Copy BC_MOT.GDT to your gINT data template folder (usually C:\Program Files\GINT\DATATMPL or C:\Program Files\GINTW\DATATMPL).
3. Copy BC_MOT.GPJ to your gINT projects folder (usually C:\Program Files\GINT\PROJECTS or C:\Program Files\GINTW\PROJECTS).

See File:System Properties anywhere in the program if you are not sure of the above locations.
*************************************************

SPECIAL NOTES:
1.  The BC_MOT.GLB library file is meant to be used by itself.  DO NOT MERGE into your library.  When you are working on a British Columbia Ministry of Transportation project, anywhere in gINT, select the File:System Properties menu item and change the library file to BC_MOT.GLB.  In version 6 or later, you can also use the File:Change Library command.  When you want to work on a non-MOT project, switch back to your usual library using the same means.

2.  You can split a log between the summary and core logs by specifying the depth at which to split the log under the "Rock Core Log Start" field in the BOREHOLE (POINT) table.  The SUMMARY LOG will stop at this depth and the ROCK CORE LOG will start at that depth.  Therefore, you must output split logs twice, once with each form.
*************************************************